Tape-On Window Visors

Vehicle Fitment and Market Verification

This product is intended for the new-generation Kia Seltos MK2 (SP3) SUV shown in the application image and listed by BENKE as the 2026 application. Model-year labels differ between markets. A vehicle registered or advertised as a 2026 Seltos may still have the previous-generation body.

First-generation SP2, SP2i and SP2c/KX3 bodies are excluded, including the U.S.-market 2026 Seltos. North America identifies the new generation as model year 2027, but that label does not by itself confirm this set's regional fitment. Provide the destination market, local model year, model code where available, and clear side-window and door-frame photos. Regional SP3 variants, trim differences and LHD/RHD applications require confirmation against the mounting profile and sample fitment.

Materials, Finish and Six-Piece Layout

The visor bodies are injection-molded from polycarbonate, with stainless steel trim along the upper edge. The supplied product photos show a smoke-tinted body and bright metallic trim. The set contains six pieces arranged as three per side. Confirm each piece's position against the approved product layout before installation or resale.

This construction offers a coordinated exterior styling option for a vehicle-specific accessories range. Agree any alternative color, trim treatment or branding requirement during quotation.

Outside-Mount Installation and Sample Evaluation

The tape-on design attaches along the exterior upper door-frame and side-window surround. It does not use the in-channel mounting method. No drilling is required for the adhesive mounting design.

1. Confirm the vehicle body, inspect all six pieces and dry-fit the complete set before removing adhesive liners.
2. Clean and dry the bonding surfaces using a surface-safe preparation method. Check the supplied tape instructions and any specified application conditions.
3. Check alignment and clearances at doors, mirrors, glass and seals. Use an adhesion promoter only where specified and suitable for the surface.
4. Expose the adhesive progressively, align each piece and apply firm, even pressure according to the supplied instructions.
5. Remove the protective film as instructed and check full door and window operation. Follow the specified bonding and washing guidance before use.

For a trade sample, record the vehicle market and model code, piece positions, mounting contact, appearance and window operation. Resolve fitment questions before approving the bulk specification.

Wholesale Supply and Small-Batch Market Testing

Start with a sample and discuss a small-batch order to evaluate the application in your sales channel. This helps distributors and e-commerce businesses assess fitment, presentation and demand before planning larger replenishment orders. Send your target quantity and destination so BENKE can confirm product availability, the applicable MOQ, pricing and production schedule.

The 4,000+ vehicle-model range gives buyers a broader starting point for assortment planning. Request an application list for your market and identify the models you need. Availability and minimum quantities are confirmed per application and order.

OEM, Private Label and New Vehicle Development

For an existing application, share your logo files, label information, packaging artwork and sales-channel requirements. BENKE can evaluate OEM branding and customized packaging, then confirm the specification, setup requirements and approval sample. Small-batch product purchasing and customized packaging may have different minimum quantities.

For a new vehicle project, provide the target market, vehicle details, reference photos, available scan or CAD data, expected volume and launch target. BENKE's development capabilities include vehicle scanning, product design, mold development, prototyping and sample verification. Direct communication with the factory helps buyers assess feasibility and organize tooling and sampling promptly. Tooling cost and timing follow the confirmed project scope and vehicle-data availability.

Packaging, Production Review and Trade Support

Discuss packaging around your distribution method, including wholesale cartons, retail presentation or e-commerce fulfillment. Confirm set identification, protective packing, labels, carton quantities, dimensions and weights before calculating freight or publishing shipping data. Request the product images and installation information available for the approved specification.

BENKE is an automotive accessory manufacturer based in Lishui, Zhejiang, China, with development and production capabilities supported by material, in-process, final and packing inspections. Agree the sample acceptance points and bulk inspection requirements with the sales team. For an after-sales question, provide the order or batch reference, vehicle details, affected piece and clear photographs so the team can review the issue. Warranty and remedy terms are confirmed with the order.

Frequently Asked Questions for Trade Buyers

Will this set fit every 2026 Kia Seltos?

No. This listing is for the new-generation MK2/SP3 body shown in the application image. The U.S.-market 2026 Seltos uses the previous-generation body and is excluded. Send the destination market, local model year, model code and clear side-window photos for confirmation.

Can I sell this set for the North American 2027 Seltos?

North America identifies the new generation as the 2027 Seltos. That naming does not establish this set's local fitment. Ask BENKE to check the regional window-frame profile and approve a sample before adding North American model-year compatibility to your listing.

What materials and manufacturing process are used?

The visor bodies use injection-molded polycarbonate (PC), with stainless steel trim. The product photos show a smoke-tinted body and bright metallic trim. Any alternative material, color or trim specification must be agreed during quotation.

Are these tape-on or in-channel window visors?

They are tape-on, outside-mount window visors. They attach to the exterior upper door-frame and side-window surround using adhesive tape, rather than fitting inside the window channel. Dry-fit the complete set and follow the supplied surface-preparation and bonding instructions.

What does the 6 PCS set include?

The supplied product layout shows six matched pieces, arranged as three per side. Confirm the position of the longer and shorter pieces against the approved layout. The piece count describes the product set and does not mean the vehicle has six opening windows.

Do you support samples and small-batch wholesale orders?

Yes. BENKE welcomes sample and small-batch inquiries from automotive trade buyers. Send the destination market, application and required quantity so the team can confirm sample availability, MOQ, price and timing. Customized branding or packaging may carry separate minimum quantities.

Can BENKE supply OEM branding and private-label packaging?

Yes. Share your logo artwork, labels, packaging design and channel requirements. BENKE will review the customization scope, minimum quantity and approval sample. Product branding, packaging and any additional requirements are confirmed in the quotation and order specification.

How can buyers source additional models or develop a new application?

Send your market-specific vehicle list for review against BENKE's range covering 4,000+ vehicle models. For a new application, provide vehicle details, reference photos, available scan or CAD data and expected volume. BENKE can assess design, tooling and sampling requirements and quote the project schedule.

How do these rain guards support ventilation in wet weather?

The visors help divert rain from slightly opened windows and support airflow. Results depend on rainfall, wind direction, driving conditions and window opening. They do not seal an open window or replace the vehicle's ventilation and demisting systems.

What information is needed for a wholesale quotation?

Provide your company and destination market, Kia Seltos model year and body code, side-window photos, required sets, preferred finish and branding or packaging needs. Include the delivery destination and launch target so BENKE can confirm fitment, commercial terms and an appropriate supply plan.

Request a Wholesale Quote or Sample

Send your destination market, vehicle model year and code, clear side-window photos, required quantity and branding or packaging needs. BENKE will review the application and confirm sample options, wholesale pricing and the order schedule.